The high performance waterproofer designed to enhance performance and revitalise the breathability of waterproof clothing with wicking liners. Easy to apply by hand, non flammable, PFC and aerosol free.
For waterproofing rain gear.
Features:
- Easy to use spray-on waterproofing for all breathable waterproof clothing with wicking liners
- Adds water repellency to the areas that need it most and revives breathability without tumble drying
- Enhances the performance of your gear, keeping you warmer and drier
- Recommended for Gore-Tex®, Sympatex®, eVent®, Nikwax Analogy® and all other waterproof fabrics
Why breathability depends upon water repellency…
Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct®.
Waterproof clothing needs to be breathable…
When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry. The waterproof fabric must allow moisture vapor to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet. Nikwax TX.Direct®
Use Nikwax TX.Direct® when your raingear soaks up water…
Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash®, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct®, after cleaning first with Nikwax Tech Wash®.
If your raingear doesn’t have a wicking lining, use Nikwax TX.Direct® Wash-In… Using the right waterproofing product is important. Nikwax TX.Direct® Spray-On is fantastic for raingear with wicking linings, as it provides Durable Water Repellency (DWR) without impairing wicking properties. However, if wicking linings aren’t present, using Nikwax TX.Direct® Wash-In ensures you won’t miss any areas (complete DWR coverage!) and it’s easy to apply in a washing machine.
How Nikwax TX.Direct® Spray-On protects…
Nikwax TX.Direct® Spray-On is easy and quick to apply, and its highly Durable Water Repellency (DWR) develops on air drying. The need for tumble drying is removed, this saves energy and protects more vulnerable, older, garments from heat. Nikwax TX.Direct® Spray-On has been specifically designed and optimized for breathable waterproof garments; it leaves a flexible water repellent treatment on individual fibres allowing moisture vapor to pass through, maintaining breathability. The spray-on application allows for direct treatment of areas which require it most (e.g. elbows and seams on jackets) and will not compromise the properties of internal wicking liners.
How To Use:
IMPORTANT: Shake well before use. Always clean first with Nikwax Tech Wash.
- Protect work surface from potential overspray.
- Spray evenly onto clean, wet item from a distance of 15cm.
- Wait for 5 minutes. Remove any surplus product with a damp cloth.
Nikwax TX.Direct® treated clothing needs no heat to develop Durable Water Repellency (DWR)…
Air dry or tumble dry on a low setting if care label allows.
To maintain waterproofing always clean with Nikwax® Tech Wash®. Do not use conventional detergents.
